COLLARING MACHINE
79
S-80
4. The tool locking device
thread: Check the lubrication
of the thread once a month.
Lubricate the thread if
required.
Use Wurth HSS 2000 grease
spray or equivalent.
E!
All other bearings of the S-80 unit are sealed and lubricated for lifetime.
To perform the lubrication, proceed as follows:
1. Turn the main switch off (0).
2. Lubricate the above-mentioned parts (especially part 3) with vaseline: KLÜBER ISOFLEX
TOPAS L152 (NLGI 2) or equivalent.
If the machine is used only occasionally, it is recommended to check and
lubricate the machine at least once a year.
