COLLARING MACHINE
49
S-80
6.5. TOOLS
6.5.1. MILLING TOOL
2
3
1
4
5
7
6
8
1. Retention knob
2. Tool holder cone
3. Bearing
4. Grease nipple
5. Collet chuck
6. Spring collet
7. Pin tightening nut
(Tool in the tool kit)
8. Milling pin
Changing of the milling pin:
Open the pin tightening nut (7) with the special tool, loosen the nut to release the pin
from the spring collet (6).
Change pin, and tighten nut: Adjust the pin height, measure with a vernier caliper from
the from the bottom of the collet:
Pin diameter 6 mm - length 22 mm from the bottom of the collet.
Pin diameter 8 mm - length 25 mm from the bottom of the collet.
X
X : Pin length from the bottom of the collet.
¨NOTE!
¨
Tighten the nut securely.
