COLLARING MACHINE
39
S-80
10
Drilling tool
number of teeth
Number of cutting edges on
the drill.
11
Collaring tool
diameter
Diameter with pins fully
out. Measure!
12
Collaring tool
shoulder length
Length of tool from bottom
to shoulder surface of the
tool = the length of the tool
that will go inside the tube.
13
Collaring tool pin
length
Length of tool from cone
bottom to pin ends with
pins fully out
14
Collaring tool
number of pins
A counting parameter for
the program.
15
Trimming tool
diameter
The midst diameter of
the cutter insert path (see
picture)
16
Trimming tool
length
Length of tool from cone
bottom to trimming cutting
insert / tooth.
17
Trimming tool
cutter width
Width of the cutting insert /
cutter blade of the tool.
18
Trimming tool
number of teeth
The trimming tool can be
equipped with more than
1 tooth / cutting insert.
Counting parameter.
Tap “Save” after changing the settings.
