COLLARING MACHINE
33
S-80
Process adjustment screen
1
2
3
4
1.
Tube / collar
Basic information on tube to be collared
2.
Process: Pull down menu
Select the desired process from the pull down menu
3.
Adjustable definitions of
the selected process
Check and alter definitions if required
4.
NOTE! Save after changes are done!
Milling process settings has all required information to
make a pilot hole.
For pilot hole measures, see pilot hole table.
Check the milling instructions for tool size, always use
a correct size milling pin.
Drilling process settings has all required information to
make a round pilot hole by drilling.
Collaring process settings has all required information
to make a collar.
Check tool adjustment.
Trimming process settings has all required information
to trim the collar to desired height.
