COLLARING MACHINE
47
S-80
6.3. STOPPING THE MACHINE
6.3.1. EMERGENCY STOPPING
In case of danger, stop the machines by pressing the EMERGENCY STOP push button
completely down. This immediately interrupts all functions of the S-80 unit.
¨NOTE!
¨
The safety curtain functions as emergency stop! When the safety
curtain is interrupted, the machine will stop immediately.
When the light curtain has been interrupted during the work cycle, the HOMING of all
movements has to be done in Manual screen:
After homing the last workpiece is removed, and a new workpiece can be placed to the
clamps and a new work cycle can be started.
When the light curtain has been interrupted during the tool change or the EMERGENCY
STOP push button has been pushed, all movements (axis and cylinders) have to be driven
to correct positions on Manual screen.
For a controlled interrupt of the safety curtain, see 6.1.3. Control panel instructions: Use
the “Enter the safety area request button”.
6.3.2. NORMAL STOPPING OF THE S-80 UNIT
1. Wait until the unit has finished the automatic work cycle.
2. Disconnect the main power from the main power switch (O) on the electric cabinet.
3. Close the air supply main valve on the pressure regulator.
