Symantec NetBackup 5220, Hardware Troubleshooting Manual

Page: 157 / 169

Appendix B: Regulatory and Certification Information 157
Do not attempt to modify or use an AC power cord set that is not the exact type
required.
You must use a power cord set that meets the following criteria:
Rating: In the U.S. and Canada, cords must be UL (Underwriters Laboratories,
Inc.) Listed/CSA (Canadian Standards Organization) Certified type SJT, 18-3
AWG (American Wire Gauge). Outside of the U.S. and Canada, cords must be
flexible harmonized (<HAR>) or VDE (Verband Deutscher Electrotechniker,
German Institute of Electrical Engineers) certified cord with 3 x 0.75 mm
conductors rated 250 VAC (Volts Alternating Current).
Connector, wall outlet end: Cords must be terminated in grounding-type male
plug designed for use in your region. The connector must have certification
marks showing certification by an agency acceptable in your region and for U.S.
must be Listed and rated 125% of overall current rating of the server.
Connector, server end: The connectors that plug into the AC receptacle on the
server must be an approved IEC (International Electrotechnical Commission)
320, sheet C13, type female connector.
Cord length and flexibility: Cords must be less than 4.5 meters (14.76 feet)
long.