62
Hardware cannot be powered on
Two LEDs on the control panel on the front of the NetBackup 5220 show system
and power status. If the system status indicator is off, the device is not powered on.
NetBackup 5220 Status LEDs
Letter
LED Indications
A
System Status
Solid green indicates normal operation.
Flashing green indicates degraded performance.
Solid amber indicates a critical or non-recoverable condition.
Flashing amber indicates a non-critical condition.
No light indicates POST is running or the system is off.
B
Power/Sleep
Continuous green light indicates the system has power applied to it or
the system is is S0 state.
Flashing green indicates the system is in sleep or ACPI S1 state.
No light indicates the power is off or the system is in ACPI S4 or S5
state.
Two power modules are included in the NetBackup 5220. The rear panel of the
device contains one AC power socket and one LED per power module.
Summary of Contents for NetBackup 5220
