Symantec NetBackup 5220, Hardware Troubleshooting Manual

Page: 21 / 169

Chapter 2
NetBackup 5220 and Symantec Storage Shelf description
21
 One USB 2x5 pin header, which supports two USB 2.0 ports
 One low-profile USB 2x5 pin header to support low-profile USB solid state drives
 One DH-10 serial Port B header
 TBD not SAS? Six Serial ATA II connectors
 Two I/O module connectors
 One SSI-EEB-compliant front panel header
 One SSI-EEB-compliant 24-pin main power connector
 One SSI-compliant 8-pin CPU power connectors
 One SSI-compliant power supply SMBus connector
Video
 On-board Server Engines* LLC Pilot II controller with
 Integrated 2D Video Controller
 32 MB DDR2 Memory
LAN
 Two 10/100/1000 ports provided by Intel
®
82575 PHYs
Expansion Capabilities (optional)
 Three full-height PCI Express* slots (passive)
 Two full-height PCI-X slots with an on-board PXH bridge chip + one full-height
and two low-profile PCI Express* slots (active)
 Five full-height PCI Express* slots (active)
Hard Drives
 NetBackup 5220:
 Eight 2.5-inch hot-swap SAS hard drives
 Flex bay for two additional fixed 2.5-inch hard drives or 3.5- inch tape drive
 Intel
®
Embedded Server RAID Technology II with SW RAID levels 0/1/10
Peripherals
 Slimline bay – not operational for the NetBackup 5220.