Suzuki 2009 LT-A750XK9, Service Manual

Page: 620 / 711

Drive Chain / Drive Train / Drive Shaft: 3A-3
Assembly
CAUTION
!
• Wash all parts before installation, clean the
inside and outside of the boots with a
cloth.
• Do not wash the boots in any commercially
available degreaser, such as gasoline or
kerosene. Washing in a degreaser causes
deterioration of the boots.
1) Fit a boot on the drive shaft end, fitting the small
diameter side of the boot to the shaft groove, fix its
end with a new boot band.
CAUTION
!
Replace the boot band with a new one.
2) Install the cage (1) on the shaft.
CAUTION
!
Install the cage with the large diameter side
“A” facing the shaft end.
3) Install the new snap ring to the cage.
CAUTION
!
Replace the snap ring with a new one.
Special tool
(A): 09900–06107 (Snap ring remover (Open
type))
4) Apply grease to the entire surface of the cage and
the inside of the outer race.
NOTE
The tube of joint grease is included in the
wheel side boot set or wheel side joint
assembly of spare parts.
“A”: Large diameter “B”: Small diameter
I931H1310005-02
1
“A” “B”
I831G1310012-02
Position
Wheel side Differential side
Grease: Quantity 60 g (2.1 oz) 60 g (2.1 oz)
(A)
I831G1310023-01
I831G1310013-01
I831G1310014-01