Front Suspension: 2B-10
3) Set the steering knuckle (3) and install the
suspension upper arm (4).
4) Temporarily tighten the suspension arm pivot nut
(upper) (5) and shock absorber mounting nut (6).
5) Tighten the steering knuckle end nut and tie-rod end
nut, and then install the wheel hub. Refer to “Front
Wheel Hub / Steering Knuckle Removal and
Installation (Page 2B-4)”.
6) Tighten the nuts to the specified torque.
Tightening torque
Suspension arm pivot nut (Upper) (b): 60 N·m (
6.0 kgf-m, 43.5 lb-ft)
Shock absorber mounting nut (c): 60 N·m (6.0
kgf-m, 43.5 lb-ft)
7) Install the brake hose. Refer to “Front Brake Hose
Removal and Installation in Section 4A (Page 4A-7)”.
8) Install the inner fender. Refer to “Front Side Exterior
Parts Removal and Installation in Section 9D
(Page 9D-6)”.
9) Install the front wheel assembly. Refer to “Front /
Rear Wheel Removal and Installation in Section 2D
(Page 2D-2)”.
Steering Knuckle End Inspection
B831G22206011
• Inspect the steering knuckle end for wear or damage.
If any defects are found, replace the front lower
knuckle end with a new one.
• Inspect front lower knuckle end for movement. If there
are any abnormalities, replace the front lower knuckle
end with a new one.
UPPER
LOWER
3
5
6
4
I831G1220037-02
(c)
(b)
I831G1220038-02
I831G1220039-01
I831G1220040-01
Summary of Contents for 2009 LT-A750XK9
