Suzhou Monarch Control Technology MCTC-CTB-A, User Manual, Page: 57 / 183

NICE3000 User Manual Structure of the control system and the component introduction
57
delete F5-36, please operate as follows:
uF5.36 uF3.10
uF5.36
0.000 uF0.03
QUICK
Flash display
PRG
ENTER
0.000 uF8.11
QUICK
Date display
Fig 3-29 Delete the parameter in the quick menu
Press PRG in the quick menu, the displayed parameter flashes, and prompt the user whether
to delete the parameter in the menu. Pressing ENTER will delete the parameter in the menu
and the displayed parameter stops flashing, while pressing QUICK will cancel the deleting
operation and the displayed parameter stops flashing, and the operation is completed. If the
last parameter is deleted, and
“
NULL
”
will be displayed, that means no parameter is stored
in the menu.
3.4.6 Password Setting
In order to protect the parameter more effectively, the controller provides the password
protection.
The figures below show how to change the password to 12345 (bold shows flashing bit):
000000
FP-00 FP
ENTER
000000
10000
10000 12000
12000 12300
0.000 F0
PRG ENTER
12300 12340 FP FP-00
Date dispaly
ENTER
12345
Fig 3-30 Password setting procedure
When the user has set the password (the password parameter of FP-00 shouldn
’
t be ZERO),
the password protection function is valid once the user presses PRG, and the controller
shall display
“
------
”
. The user can only enter the menu after inputting the user password.
Otherwise, the user cannot enter. For factory setting parameters editing, the user still need
to input the factory password. (Warning: do not change the factory setting parameter; if the
parameter values are wrong, the controller will work abnormally, even be damaged.)
When the password protection is unlocked, user can change the password freely, and the last
input number will be the user password.
If the user wants to cancel the password protection function, enter after inputting the password
and set FP-00 as 0; when the power is on, the parameter will be protected by the password if
FP-00 isn
’
t set ZERO.
3.4.7 Function and Use Instruction of Small Keyboard
Small keyboard is consisted of three numeral lamp and three keys, and it takes charge of
displaying the information of main board MCB and receiving the simple order inputted. The
menu is divided into function F0
～
F8.