Suzhou Monarch Control Technology MCTC-CTB-A, User Manual, Page: 39 / 183

NICE3000 User Manual Structure of the control system and the component introduction
39
S1.1~S1.5 S2.1 S2.2 S2.3 S2.4 S2.5
7 segment
code function
Floor address
setting,range:0
～
31
MOD bus
terminal matching
resistance setting
OFF OFF Detection Floor address
setting
Voice station
report
S1.1~S1.3floor
setting
S1.4
，
S1.5
MOD-bus
terminal matching
resistance setting
ON ON Detection Reserved
Table 1
K1 K2 K3 K4
HCB-B Up arrival lamp
Down arrival
lamp
Up arrival gong
Down arrival
gong
HPB
Overload/full-
load
Reserved Up indicate Down indicate
7 segment
function
G
Overload/full
load
Up indicate Down indicate
Voice station
report
Overload/full
load
Arrival output Up output Down output
Table 2
C1 C2 C3 C4 C5 C6
Common
terminal
BM BM BM BM BM BM
HPB, F0 F1 F2 F3 F4
负号
7 segment A B C D E F
Voice station
report
Floor binary
bit0
Floor binary
bit1
Floor binary
bit2
Floor binary
bit3
Reserved Reserved
Table 3 open collector output binary floor display
CN2
A1 A2 AM B2 B1 BM
1 2 3 4 5 6
C1
C2 C3 C4 C5 C6
Fig3-9 CN2 terminal definition Fig 3-10 CN3 terminal definition
HCB-B function 1)
Totally compatible for the original HCB-B function

The definitions of the dial-code switch bits are as the table 1.
The floor address is the valid floors (standard as the leveling plate) increased down to up, and
it has no relations with the actual floor numbers.
For instance, if a building has 2 floor basement, 10 floors above the earth, and the 3rd and 4th
floor are the non-service floor, then the floor address setting is: the 2nd floor of basement set as
1; the 1st floor of the basement set as 2; the 1st floor above the earth set as 3, 2nd floor above
set as 4, and if there is leveling plate in the 3rd and 4th floor, then set them as 5,6. From the