Suzhou Monarch Control Technology MCTC-CTB-A, User Manual, Page: 46 / 183

Structure of the control system and the component introduction NICE3000 User Manual
46
Instruction of plugs 3)
Plug Name Function Definition
JP1 Setting of matched resistance to the terminal of MOD main line
JP2 Testing terminal, setting as
“
OFF
”
in application
J1 setting: Set the matched resistance to the terminal according to the actual needs. Generally
it
’
s only needed to set the J1 plug with the floor address 1 as
“
ON
”
. Other floors needn
’
t
set, which means
“
OFF
”
.
Note: Dot-matrix V4 is reserved in the normal condition. When the users non-standard need
three dot-matrixes to display the floors, it will add this dot-matrix;
Inspection: When the lift is in inspection running, hall displaying panel V2, V3 scrolling display
“
INS
”
and the current floor car located.
3.3.4 Direction for use of MCTC-HCB-H
Appearance and size (Shown as Fig 3-15) 1)
56m
m
D1
JP3
JP4
CN1
JP1
JP2
R2.5m
m
70m
m
14
4m m
13
4m m
V1
V2
MCTC-HCB-
H
S1
V3
Fig 3-15 Installation size of MCTC-HCB-H
MCTC-HCB-H is the advanced product of MCTC-HCB-A. It possesses all the function of
MCTC-HCB-A, and optimizes the hardware: The setting of floor is changed from the dialing
code setting to the button setting.