Suzhou Monarch Control Technology MCTC-CTB-A, User Manual, Page: 148 / 183

Function parameter description NICE3000 User Manual
148
FE-32
Lift factory function selection1 Default 35843 Min. Unit 1
Setting Range 0
～
65535
This function code sets the lift factory required function. Each function is controlled by one
binary number,
”
1
”
expresses this function allowable,
”
0
”
expresses this function forbidden.
If lift needs motorman function, fire return function, inspection automatic close, car call miss-
delete, door lock jump-out inspection function valid while other function invalidation, the binary
system setting is as follows:
Binary bit Function Binary setting Binary bit Function Binary setting
Bit0 Motorman 1 Bit8
Time-sharing
service floor
0
Bit1
Fire return to
main floor
1 Bit9
Independent
running
0
Bit2 Re-leveling 0 Bit10
Inspection
automatic
close door
1
Bit3 Pre-opening 0 Bit11
Car call miss
delete
1
Bit4
Hall call
conglutination
disposal
0 Bit12
Hall call miss
delete
0
Bit5
Night security
floor
0 Bit13
Emergency
auto-running
car
0
Bit6
Down
collective
selective
fastigium
service
0 Bit14
Emergency
auto-rescue
overtime
protection
0
Bit7
Fastigium
service
0 Bit15
Door lock
jump-out test
1
The setting binary number is 1000110000000011; the corresponding algorism number is 35843,
so FA-01 should be set as35843.
FE-33
Lift factory function selection2 Default 32 Min. Unit 1
Setting Range 0
～
65535
Factory default is forced reducer conglutination inspection function, which is listed in the
following chart.
Binary bit Function Binary setting Binary bit Function Binary setting
Bit0 Reserved 1 Bit8
N.C. output of
enclosed star
contactor
0
Bit1
Door opening
limit keep open
1 Bit9
Reversal leveling
immediate stopping
0