Suzhou Monarch Control Technology MCTC-CTB-A, User Manual, Page: 117 / 183

NICE3000 User Manual Function parameter description
117
Function code Name Default Min. Unit Setting Range
F4-05 Low bit of leveling plate 0 1 0
～
65535
It can show the pulse number of leveling plate
’
s practical length. It is noted when auto-tuning
in shaft. Users can adjust it according to practical status.
Function code Name Default Min. Unit Setting Range
F4-06 High bit of floor high 1 0 1 0
～
65535
F4-07 Low bit of floor high 1 0 1 0
～
65535
┆ ┆ ┇ ┇ ┇
F4-64 High bit of floor high 30 0 1 0
～
65535
F4-65 Low bit of floor high 30 0 1 0
～
65535
The bit of floor height i means the pulse number of height between floor i leveling plate to
floor (i+1) leveling plate. Every height corresponds to one number of 32 bit numbers in binary
system. Among those, high 16 bit parallels high bit of this floor height, and low 16 bit parallels
low bit of this floor height.
For example: the floor height from floor 4 to floor 5 is F4-12=6
，
F4-13=54321.In in binary it
shows as follows:
0000
，
0000
，
0000
，
0110
，
1101
，
0100
，
0011
，
0001
Practical pulse number will be displayed as 447537 in decimal system.
6.6 F5 Group Terminal Function Parameters
Function code Name Default Min. Unit Setting Range
F5-00
Driver switch time
and time-switching
automatically
3s 1 1
～
200s
When there
’
s calling from other floors in driver state, it will turn to the normal state
automatically after F5-00 time; then return to driver state after the running.
When the parameter of F5-00 is smaller than 5, the mentioned function is cancelled, then it
’
s
the same with the normal driver function.
Function code Name Default Min. Unit Setting Range
F5-01 Selection function of
terminal X1
33 1 00
～
59
F5-02 Selection function of
terminal X2
35 1 00
～
59
┆ ┆ ┇ ┇ ┇
F5-23 Selection function of
terminal X23
00 1 00
～
59
F5-24 Selection function of
terminal X24
00 1 00
～
59