93
TS 700, TS 800
:
Use a suitable tool to press the
nipple at the end of the cord into
its mount (arrow) in the filler cap.
376RA203 TG
:
Press the nipple at the other end
of the cord into the mount inside
the tank.
– Perform leakage test,
376RA202 TG
– Take out the bottom screw on the
– Remove the carburetor,
– Remove the intake and air
manifolds on the tank housing
side,
– Push the impulse hose out of the
– Unscrew the rubber buffers on
the ignition and clutch sides,
– Remove the front handle,
– Unscrew the spring,
The new tank housing is supplied
complete with all other,
preassembled and installed parts
(refer to the spare parts list).
:
Draw the tank housing (1) out of
the crankcase to the rear.
– Reassemble parts in reverse
order.
376RA308 TG
1
Ensure that the impulse hose and
other leads are routed correctly and
without kinking.
– Perform leakage test,
– Reassemble remaining parts in
reverse order.
– Tightening torques,
12.7.4 Removal / installation of
the tank housing