46
TS 700, TS 800
– Install the ignition module and
adjust the distance between
ignition module and flywheel,
– Reassemble remaining parts in
reverse order.
– Remove the cap,
– Remove the fan cover,
:
Remove the spark plug boot (1).
:
Unscrew the spark plug (2).
2
1
376ET103 TG
:
Push the locking strip (1)
0000 893 5903 as far as possible
into the cylinder.
– Position the piston against the
locking strip (1).
1
376RA102 TG
:
Unscrew the nut (1).
376RA105 TG
1
– Place the thrust piece of the
puller over the threaded stub.
:
Screw the puller (1) 1106 890 450
into the flywheel.
:
Turn the screw (2) of the puller
clockwise until the flywheel
376RA106 TG
1
2
comes off the tapered end of the
crankshaft stub.
8.5
Removing and installing
the flywheel