49
TS 700, TS 800
:
Remove the roll pins (arrows)
with a suitable punch.
376RA158 TG
:
Remove the switch (1) from the
guide.
Remove the cap when fitting a new
switch.
1
376RA159 TG
Note:
Check correct operation before
fitting a new short circuit wire,
– Untie the string from the old wire
and tie it to the new wire.
:
Fit straight pins.
– Line up the switch.
– Drive home the roll pins with a
suitable punch until they are
flush.
376RA160 TG
:
Pull the short circuit wire (1) in
below the carburetor with the
help of the string.
1
376RA233 TG
:
Use a deflector when pulling the
wire through between cylinder
and tank housing.
376RA192 TG
:
Place the short circuit wire and
ground wire in the cable guide
(arrow).
376RA193 TG
The diagram shows the cable
guides on the dismantled tank
housing for clarity.
:
Place the short circuit wire in the
cable guides (arrows).
Note:
376RA194 TG
The wires must be seated securely
in the cable guides. Loose wires
may touch the hot cylinder and be
damaged.
– Reassemble remaining parts in
reverse order.