95
TS 700, TS 800
No.
Part name
Part No.
Use
Rem.
29
Torque wrench
5910 890 0302
Screw connections (0.5 to 18 Nm)
30
Torque wrench
5910 890 0312
Screw connections (6 to 80 Nm)
31
Bit size 13, long
5910 893 2804
Remove and install decompression
valve
32
Bit size 17
5910 893 5610
Nut for flywheel
33
Bit size 19, long
5910 893 5613
Spark plug
34
Bit size 21, long
5910 893 5616
Clutch
35
Bit T 27 x 125
0812 542 2104
Remove and install spline socket head
screws with electric or pneumatic
screwdrivers; tighten down screws with
torque wrench
36
Screwdriver T 27 x 200
5910 890 2415
IS-P screws (4 mm)
1)
37
Screwdriver Q-SW8x200
5910 890 2420
Carburetor nuts
38
Drift pin
1124 893 7200
Remove and install deep groove ball
bearings (clutch side)
39
Drift pin
4119 893 7205
Install and remove deep groove ball
bearings (ignition side), remove ball
bearings on clutch side
40
Drift pin
4224 893 7200
Install and remove deep groove ball
bearings (belt pulley)
41
Pliers DIN 5254-A 19
0811 611 8380
Remove and install external retaining
rings
42
Assembly pin
1111 893 4700
Remove and install the piston pin
43
Insert T20
5910 893 2803
Diaphragm / support plate on cylinder
44
Flange
4224 893 2501
Seal cylinder exhaust port
45
Test wheel
5910 851 6100
Test truth of running of mount for
abrasive wheel
Remark:
1) Use only for releasing P screws