![background image](http://html1.mh-extra.com/html/stihl/ts-700-ts-800/ts-700-ts-800_service-manual_1379632078.webp)
77
TS 700, TS 800
:
Push the lever (1) onto the
throttle shaft.
Note:
Ensure that the flat faces on the
lever and throttle shaft are lined up
when fitting the lever.
1
376RA241 TG
– Insert the screw in the lever and
tighten it down.
– Tightening torques,
– Check correct functioning and
easy movement again.
If actuation of the air flap shaft is stiff
and/or the air flap cannot be opened
or closed properly:
– Remove the carburetor,
– Troubleshooting on the
carburetor,
– Remove the air flap shaft, then
clean the shaft and shaft guides
with a little standard solvent-
based degreasant not containing
any chlorinated or halogenated
hydrocarbons.
– Remove the air flap rod,
:
Undo screw (arrow).
376RA256 TG
– Turn the air flap shaft until the air
flap is horizontal.
1
376RA257 TG
:
Use a suitable tool to pull the air
flap (1) out of the slot in the air
flap shaft on the throttle shutter
side.
:
Remove the circlip (arrow) with a
suitable tool.
376RA258 TG
:
Pull the ring (1) and O-ring (2) off
the air flap shaft.
1
2
376RA259 TG
12.3.7 Air flap shaft / air flap