16
TS 700, TS 800
:
Draw the shaft (1) out of the deep
groove ball bearings.
1
376RA01
1 TG
:
Unscrew the four screws (1) and
remove them with the
compression springs (2) and
sleeves.
1
2
376RA013 TG
:
Remove the flange.
338RA011 VA
:
Remove the washer with rubber
ring.
338RA012 VA
:
Pull the bearing (1) out of the
rubber ring.
1
376RA014 TG
:
Remove the washer (1) and
rubber ring (2).
1
2
376RA015 TG
:
Remove the circlips in front of the
deep groove ball bearings from
the grooves on both sides.
Note:
Use pliers with short rounded tips.
376RA009 TG
:
Press both deep groove ball
bearings and the ring out of the
bearing with a drift pin (1)
4224 893 7200.
– Reassemble the parts in reverse
order.
1
376RA006 TG
Note:
Particular attention must be paid to
the following steps.
:
Fit a circlip in a groove in the
bearing.
376RA010 TG