![background image](http://html1.mh-extra.com/html/stihl/ts-700-ts-800/ts-700-ts-800_service-manual_1379632060.webp)
59
TS 700, TS 800
The handlebar clamp (1) must be
removed first in order to remove the
rubber buffer.
1
376RA182 TG
:
Take out the screws (arrows).
– Steady the nuts on the back with
a suitable wrench when
unscrewing the screws.
376RA290 TG
:
Undo screw (arrow).
– Take off the rubber buffer, stop
buffer and sleeve.
376RA262 TG
:
Note the installation sequence.
– Reassemble remaining parts in
reverse order.
– Tightening torques,
376RA215 TG
Damaged rubber buffers (annular
buffers) must always be replaced.
Rubber buffer on ignition side
:
Prise the plugs (arrows) out of the
rubber buffers.
376RA293 TG
:
Remove the screws (arrows)
from the rubber buffers.
376RA294 TG
10.1
Rubber buffer between
front handle and
crankcase
10.2
Rubber buffer between
crankcase and tank
housing