![background image](http://html1.mh-extra.com/html/stihl/ts-700-ts-800/ts-700-ts-800_service-manual_1379632022.webp)
21
TS 700, TS 800
– Remove the ribbed V-belt,
– Remove the starter cup,
:
Draw the belt pulley (1) off the
crankshaft stub.
1
376RA023 TG
:
Examine the clutch drum, it must
not be scored or heavily worn.
Replace the belt pulley if
necessary.
376RA024 TG
:
Remove the circlip (1).
1
376RA025 TG
:
Drive out the ball bearing with the
drift pin (1) 4224 893 7200.
1
376RA026 TG
:
Draw the ring (1) off the
crankshaft stub.
– Reassemble parts in reverse
order.
1
376RA027 TG
Note:
Drive the ball bearing in as far as
possible with the drift pin (1)
4224 893 7200.
1
376RA028 TG
Note:
Do not use the assembly stand
5910 890 3100 for the following
work. Lay the machine on a suitable
level surface to carry out the work.
– Remove the starter cover,
see
376RA032 TG
– Remove bearing with guard,
:
Turn the hexagon of the
tensioner 1/8 of a turn clockwise
until the hexagon is turned further
by the spring.
Note:
As the spring may cause the
hexagon with wrench to turn
abruptly, it is important to hold the
wrench securely and to relax the
spring slowly.
:
Remove the screws securing the
tensioner (arrows).
376RA033 TG
5.5
Belt pulley / clutch drum
5.6
Tensioner