20
TS 700, TS 800
– Remove bearing with guard,
see
:
Remove screws from starter
cover (arrows).
376RA020 TG
:
Remove starter cover (1)
1
376RA021 TG
:
Remove the ribbed V-belt (1)
from the belt pulley.
– Reassemble parts in reverse
order.
– Tightening torques,
1
376RA022 TG
– Remove starter cover and relax
the ribbed V-belt,
– Remove cap and spark plug,
:
Push the locking strip (1)
0000 893 5903 as far as possible
into the cylinder.
– Fit the piston.
1
376RA102 TG
:
Unscrew the nut (arrow) from the
starter cup.
376RA029 TG
:
Pull out starter cup.
376RA030 TG
Note:
Ensure that the washer (1) is
present before fitting the starter cup.
– Slide the starter cup onto the
shaft.
– Screw on the nut.
1
376RA309 TG
– Block the piston and screw the
nut tight.
– Tightening torques,
– Reassemble remaining parts in
reverse order.
5.3
Ribbed V-belt
5.4
Starter cup