30
TS 700, TS 800
:
Unscrew the spark plug (1).
376RA071 TG
1
:
Undo screws (arrows).
– Remove the air guide shroud.
– Reassemble parts in reverse
order.
– Tightening torques,
376RA070 TG
Before removing the cylinder,
decide whether or not the
crankshaft is to be removed.
With the cylinder in place:
The piston must be blocked to
prevent the crankshaft turning in
order to remove the flywheel and
clutch.
– Remove muffler,
– Remove shroud,
:
Release hose clips (arrows).
Note:
The hose clips must be unscrewed
right up to the end of their screw
threads for easy assembly.
376RA072 TG
:
Take out the screws through the
holes (arrows) in the cylinder.
376RA073 TG
:
Carefully lift the cylinder up,
pulling the three elbow flanges
(arrows) off the cylinder at the
same time.
Note:
Do not use pointed or sharp-edged
tools for this job.
376RA031 TG
:
Carefully draw the cylinder off the
piston.
376RA356 TG
:
Remove the cylinder gasket (1).
– Examine the cylinder for damage
and scores and replace if
necessary.
– Always fit a new piston if a new
cylinder has to be installed.
1
376RA074 TG
7.6
Cylinder and piston
7.6.1
Removal