86
TS 700, TS 800
– Remove shroud,
– Remove the air filter,
– Remove the filter base,
– Remove the carburetor,
– Unscrew the rubber buffers,
A damaged intake manifold may
lead to impaired engine
performance.
– Troubleshooting,
4.4 or
:
Remove the sleeve (1).
– Press the connectors of the
intake manifold out through the
hole in the tank housing towards
the cylinder.
1
376RA154 TG
:
Release the hose clip (1) on the
intake manifold.
– Draw the intake manifold (arrow)
off the cylinder port and hole in
the tank housing.
1
376RA367 TG
:
When installing the intake
manifold, ensure that the flat
sides (arrows) on the intake
manifold and on the intake
connector of the cylinder are
lined up with one another.
376RA368 TG
:
To draw the manifold flange into
the intake port of the tank
housing, wrap a piece of string
(1) approx. 15 cm long round the
manifold and guide the ends of
the string through the intake port.
– Press the manifold down
1
376RA199 TG
between cylinder and tank
housing.
:
Draw the ends of the string
through the intake port with the
manifold flange.
– Coat with Press Fluid OH 723,
In this way, the manifold flange is
376RA291 TG
fitted through the intake port of the
tank housing without damaging the
manifold.
:
Ensure that the flange (arrows) is
correctly seated in the tank
housing.
– Reassemble remaining parts in
reverse order.
– Tightening torques,
376RA323 TG
12.5
Removal and installation
of the manifolds
12.5.1 Intake manifold