Configuring Remote Power Management
September 2010
Spectra nTier500 Backup and Archive Appliance
81
If your network does not use DHCP, or if you simply want to use static
addressing, use the instructions in this section to set a static IP address.
Using a static IP address ensures that you always know the IP address for
the nTier500 RMM2 card and is highly recommended.
1.
Set IP auto configuration to
None
.
2.
Enter the following information:
Address
– Enter a valid Class A, B, or C IP address in the form
nnn.nnn.nnn.nnn
.
Subnet
– Enter the subnet mask. The subnet mask must be a valid
octet in the form
nnn.nnn.nnn.nnn
.
Gateway
– Enter a valid Class A, B, or C network gateway address in
the form
nnn.nnn.nnn.nnn
.network gateway. Enter 0.0.0.0 for the
Gateway if your network does not use a gateway.
3.
Enter the super user name and password in the
Super User login
and
Super User Password
fields, respectively.
Note:
The default superuser name is
admin
; the default password is
password
. User names and passwords are case sensitive.
4.
Select
Setup Device
to save your changes.
Change the RMM Super User Password (Recommended)
You use the superuser login information when connecting to the RMM to
configure and use its features.
Use the following steps to change the default superuser name and
password.
1.
Enter the superuser name in the Super User login field.
2.
Enter the current password in the Super User Password field.
3.
Enter a new password in the New password field, the re-enter the new
password in the New password (confirm) field.
4.
Select
OK
to save your changes.
Summary of Contents for nTier500
