Chapter 4 — Configuring the nTier500
80
User Guide
90990030
3.
From Windows Explorer, locate the Psetup program file
(
psetup_1.2.3.exe
). It is located in the following folder on the boot
drive for the nTier500:
C:\Program Files (x86)\SpectraLogic\drivers\Intel Remote
Management Module
Notes:
The number included in the name of the program file may
not be same as above (for example, psetup_1.2.4.exe instead
of psetup_1.2.3.exe).
The documentation for RMM is included in the RMM folder
on the
Spectra nTier Backup and Archive Appliance
Documentation and Software
CD. This folder also contains the
Psetup program file,
4.
Double-click on the program file name to launch the program. The
Device Setup 1.2.3. dialog box displays.
Set the RMM IP Address
Use the following steps to configure a static IP address or determine the IP
address assigned by the DHCP server. You need the IP address when
accessing the RMM2 functionality.
The MAC address for the RMM2 in the nTier500 displays in the Device
MAC address field.
If your network uses a DHCP server, the IP address that was assigned
to the RMM2 by the DHCP server is displayed in the IP address field.
Figure 39
The RMM Device Setup 1.2.3 dialog box.
Summary of Contents for nTier500
