Simrad SC90, Installation Manual

Page: 352 / 544

350
419050/B
• The transducer is retracted to its upper position.
• The vessel is berthed or at sea.
Neither tools nor instruments are required.
Caution
You must never set the SC90 to "ping" unless the transducer is submerged in water.
The transducer may be damaged if it transmits in open air.
Procedure
1 Make sure that the SC90 user interface is fully operational.
a Make sure that the SC90 visual presentation is shown with adequate quality.
If necessary, adjust the display and/or the relevant properties in the Processor
Unit operating system.
b Make sure that the Operating Panel is functional.
Press and/or turn each button, and make sure that the corresponding function is
activated in the user interface.
c Make sure that the menu system offered by the SC90 is operational.
d Make sure that the relevant views are operational.
Move the cursor to the views in the main SC90 presentation. Click inside one
of the views. Make sure that the view is activated, and that relevant changes
are made in any dynamic menus.
e If relevant, connect a computer mouse to the Processor Unit.
Make sure that the computer mouse works in the SC90 user interface. Make
random selections, and make sure that the relevant sub-menus, functions or
dialog boxes are activated.
2 Open the message bar at the bottom of the SC90 presentation.
3 Verify that no error messages are presented during normal operation.
4 Select
Help
in a parameter dialog.
a Make sure that the context sensitive online help opens on the correct page.
b Select
Free
to open the large help view.
c Make sure that the context sensitive online help opens on the correct page.
d Close the online help.
Result
Requirements
Results
The basic functionality of the SC90 is present.
No error messages are presented.
Simrad SC90 Installation Manual