Advanced commissioning
7.10 PID technology controller
SIMATIC ET 200pro FC-2 converter
Operating Instructions, 04/2018, FW V4.7 SP10, A5E34257324B AF
147
①
The inverter uses the start value when all the following conditions are simultaneously satisfied:
•
The technology controller supplies the main setpoint (p2251 = 0).
•
The ramp-function generator output of the technology controller has not yet reached the start value.
Figure 7-24 Simplified representation of the technology controller
Basic settings
The settings required as a minimum are marked in gray in the function diagram:
●
Interconnect setpoint and actual values with signals of your choice
●
Set ramp-function generator and controller parameters K
P
, T
I
and T
d
.
