Advanced commissioning
7.6 Selecting physical units
SIMATIC ET 200pro FC-2 converter
116
Operating Instructions, 04/2018, FW V4.7 SP10, A5E34257324B AF
Procedure
1.
Select in the "Configuration" project tree.
2.
Select under the "Units" tab.
3.
Select the system of units.
4.
Select the technological unit of the technology controller.
5.
Select the motor standard.
6.
Save your settings.
7.
Go online.
The inverter signals that offline, other units and process variables are set than in the
inverter itself.
8.
Accept these settings in the inverter.
You have selected the motor standard and system of units using STARTER.
❒