58 GC250 Technical Manual
EAAM057608EN
The current mode is shown in the relevant field of the top status bar (
2
).
.
The indicated statuses
can be
OFF, MAN, AUTO, TEST, REMOTE START
.
The view of the operation mode do
n’t change when the pages change.
The view mode identifier (
1a
), and the page identifier (
1b
) identify and refer to the page so
there is no chance of error.
7.4.6
Status information (S.xx)
In this mode, the information on the system status are supplied. You can scroll through the
various pages using ▲ e ▼ buttons.
7.4.6.1
S.01 STATUS
Page S.01 displays information on the system status. It contains:
The controller operation mode:
o
:
Controller in OFF/RESET mode
o
:
Controller in Manual mode .
o
:
Controller in automatic mode.
o
:
Controller in remote start mode.
o
:
Controller in TEST mode
The status of the engine sequence:
o
: engine idle (stand-by).
o
: glow plug preheating
o
: engine start.
o
: delay of starting attempts.
o
: delay of first supply.
o
: engine running.
o
: engine cooling.
o
: stopping cycle
The status of the electrical mains (absent, low, high etc.)
Fig. 5 - Top status bar
1b
1a
KEY:
1a - View Mode identifier
1b - Page identifier
2
– Controller operation mode
E.02 AUTO
.
2
