66 GC250 Technical Manual
EAAM057608EN
Ideal speed (ref. SAE J1939: SPN515).
7.4.8.7
E.07 CAN-BUS 4
This page is not available on GC315. It is only shown if CAN-BUS communication to the engine
is enabled (P.0700 different from zero).
Some engine measures acquired by CAN-BUS are shown in this page. The number and type
of available measures depend on the engine type. Not available measures are shown with
dashes. If no information is available, the page is not shown. This page shows the following
measures
Required Torque (ref. SAE J1939: SPN91).
Actual Torque (ref. SAE J1939: SPN513).
Lost torque (friction etc.) (ref. SASE J1939: SPN514).
Current torque (compared to the maximum possible at present speed) (ref. SAE
J1939: SPN92).
Torque required by the engine's electronic control unit (ref. SAE J1939: SPN512).
Exhaust gas temperature - left bank (ref. SAE J1939: SPN2434).
Exhaust gas temperature - right bank (ref. SAE J1939: SPN2433).
Exhaust gas temperature - unique bank (ref. SAE J1939: SPN173).
7.4.8.8
E.08 CAN-BUS 5
This page is displayed onlyshown if CAN-BUS communication to the engine is enabled
(P.0700 different from zero).
Some engine measures acquired by CAN-BUS are shown in this page. The number and type
of available measures depend on the engine type. Not available measures are shown with
dashes. If no information is available, the page is not shown. This page shows the following
measures
Bearings 1 °C (SAE J1939: SPN1122, alternator bearings Temperature 1)
Bearings 2 °C (SAE J1939: SPN1123, alternator bearings Temperature 2)
Windings 1 °C (SAE J1939: SPN1124, alternator windings Temperature 1)
Windings 2 °C (SAE J1939: SPN1125, alternator windings Temperature 2)
Windings 3 °C (SAE J1939: SPN1126, alternator windings Temperature 3)
Timing Pressure, bar (SAE J1939: SPN156, Injector Timing Rail)
7.4.8.9
E.09 CAN-BUS 6
This page is displayed onlyshown if CAN-BUS communication to the engine is enabled
(P.0700 different from zero).
Some engine measures acquired by CAN-BUS are shown in this page. The number and type
of available measures depend on the engine type. Not available measures are shown with
dashes. If no information is available, the page is not shown. This page shows the following
measures
Nominal power (KW)
Rated speed (rpm)
MTU error code
Average consumption resettable counter (litres/h)
