EAAM057608EN
GC250 Technical Manual 143
11.11
GC250 has a CAN-BUS interface dedicated to the interfacing with electronic engines (CAN0).
Please refer to documents [5] [6] for detailed information. To activate the connection, first of
all, it is necessary to select the kind of engine through P.0700 parameter (among the list of
allowed engines). Then, it is possible to decide whether only to receive information from the
ECU of the engine or also send controls (P.0703, detailed in the above-mentioned
documents): by setting P.0703 on “0”, GC250 doesn't transmit anything on the CAN-BUS. In
the end it is possible to set a time-limit through P.0711 parameter: GC250 will activate an
anomaly in case it doesn't receive messages from the ECU of the engine within this period of
time.
