12 GC250 Technical Manual
EAAM057608EN
1
1.1
[1] SICES EAAM0448xx GC250 parameters chart.
[2] SICES EAAM0458xx - BoardPRG3.xx Manual.
[3] SICES EAAS0449xx GC250 parameters chart.
[4] SICES EAAM0136xx
– J1939 Interface Manual.
[5] CANopen
– Cabling and Connector Pin Assignment – CiA Draft Recommendation DR-
303-1
[6] BOSCH CAN Specification
– Version 2.0 – 1991, Robert Bosch Gmbh.
[7] SICES EAAP0457xx USB driver Installation Guide
1.2
Many accidents are caused by poor knowledge and the non-observance of safety regulations,
which must be observed when operating and/or servicing the machine.
To prevent accidents, before using or servicing the machine you should read, understand and
observe the precautions and warnings in this manual.
This manual contains the following indications:
WARNING! This indication is used in the safety messages of the manual when
there are possible danger situations that may cause injuries or death if the danger is
not avoided.
This safety messages describe the normal precautions needed to avoid danger. Ignoring these
precautions can cause serious damage to property and/or injury to persons.
ATTENTION! This indication is used in the safety messages for dangers that, if not
avoided, may cause injuries, damages or malfunctioning.
The message can be also used only for few dangers that may cause damages to things and/or
people.
INFORMATION! This term indicates that the message includes useful information
for the development of the operation or procedures clarifications.
