72 GC250 Technical Manual
EAAM057608EN
EVT.1031
1.00
GCB Open command
EVT.1032
1.00
GCB closed (from digital input)
EVT.1033
1.00
GCB open (from digital input)
EVT.1035
1.00
MCB Close command
EVT.1036
1.00
MCB Open command
EVT.1037
1.00
MCB closed (from digital input)
EVT.1038
1.00
MCB open (from digital input)
EVT.1040
1.00
Engine idle
EVT.1041
1.00
Starting cycle
EVT.1042
1.00
Engine running
EVT.1043
1.00
Cooling cycle
EVT.1044
1.00
Stopping cycle
EVT.1050
1.00
Manual start-up command
EVT.1051
1.00
Manual stop command
EVT.1052
1.00
Auto start command
EVT.1053
1.00
Auto stop command
EVT.1054
1.00
TEST mode requested by digital input.
EVT.1056
1.00
Command for start in TEST mode from serial port
EVT.1058
1.00
Command for start in TEST mode from clock/calendar
EVT.1062
1.00
Starting command for failure to close MCB.
EVT.1070
1.00
Fuel pump on
EVT.1071
1.00
Fuel pump off
EVT.1074
1.00
Reset
EVT.1075
1.00
Clock/Calendar not valid (but used by some functions)
EVT.1076
1.00
Date/time update
EVT.1077
1.00
New controller power-on
EVT.1078
1.00
Default values of the parameters recharged
EVT.1079
01.01
Active energy saving.
Active energy saving.
Anomalies are themselves saved as events. They are registered with their own alarm code
with in addition:
EVT.2000
: if they are warnings.
EVT.4000
: if they are deactivations.
EVT.5000
: if they are interlocks.
When displayed, the value 2000, 3000 , 4000 or 5000 is removed and replaced by the letter
“W”, “D” or “A” before the alarm code.
