Primary Operation
Primary Operation
39
4.2.7 Basic operation procedures for combined mode 3 (
, P.79=6)
● Target frequency is determined by
communication
.
W
hen M0, M1, M2 and REX are ‘On’, the
target frequency will be determined by the
combination of multi-speed stage levels
(Please refer
to P.4~P.6, P.80~P.84, P.86).
When
EXJ
is ‘On’, the target frequency will be determined by the set
value of P.15. Acceleration/deceleration time is set by the value of P.16.
The starting of the inverter
is determined by
external terminals
. The functions of P.996, P.998 and P.999 can be accomplished
by
communication
.
4.2.8 Basic operation procedure for combined mode 4 (
, P.79=7)
●
Target frequency
of the inverter is determined by the
external terminals
, external voltage signals,
external current signals, frequency set by pulse (P.82) or the combination of multi-speed stage
level terminals. The starting of the inverter is determined by
communication
(including ‘
Reset
’).
4.2.9 Basic operation procedures for combined mode 5 (
, P.79=8)
● Target frequency is determined by the
operation panel
. When M0, M1, M2 and REX are ‘On’, the
target frequency is determined by the
combination of multi-speed stage levels
(Please refer to
P.4~P.6, P.80~P.84, P.86). When
EXJ
is ‘On’, the target frequency will be determined by the set
value of P.15. Acceleration/deceleration time is set by the value of P.16. The starting of the inverter
is determined by
external terminals
.
