Parameter Description
Parameter Description
79
● The table of the special monitor code
Information
Content
Unit
H0000
Monitor the external terminal input port state.
Note1
H0001
Monitor the external terminal output port state.
Note2
H0002
Monitor the voltage which can be input across terminal 2-5.
0.01V
H0003
Monitor the voltage/current which can be input across terminal 4-5.
0.01A/0.01V
H0004
Monitor the voltage which can be output across terminal AM-5.
0.01V
H0005
Monitor the busbar voltage value.
1V
H0006
Monitor the electronic thermal rate
---
H0007
The rate of temperature rising accumulated by inverter
---
H0008
The inverter output power
0.01KW
H0009
The temperature of inverter module
---
H000A
The rate of heat accumulate by motor electronic
---
H000B
Target pressure when PID control
0.1%
H000C
Feedback pressure when PID control
0.1%
Note
：
1. Details of the external terminal input port state.
2. Details of the external terminal output port state.
5.17 Communication Running and Speed Command
（
P.35
）
P.35“Communication Running and Speed Command Selection”
Parameter
Factory Setting
Setting Range
Remarks
35
0
0,1
---
<Setting>
• In P.79=3 communication mode, if P.35=1, it will turn to be communication external mode when
running command and set frequency are given by the external terminals.
