Parameter Description
Parameter Description
143
Note: 1. If the version of the inverter is updated, pick inverter parameters of the lower version inverter among
inverters of different versions for parameter copying.
2. Parameters cannot be copied between inverters of different series.
3. When parameters cannot be copied, DU06 operation panel will display the alarm code or “Err”. These
alarm codes are not the abnormal alarm codes. When these alarm codes are displayed, inverter reset is not
required.
5.78 Alarm History Clear (P.996)
P.996 “Alarm history clear”
●Once P.996 is read-out (after reading out the parameter, the screen will display
) and rewrite
it. All the abnormal record will be erased.
● The usage method for the alarm history clear function of DU06 is as follows:
Press
to switch to the parameter setting mode, and then rotate
until
is displayed.
After pressing
, 0 will be displayed. After that, rotate
to change the value to 1 and press
to write in. At last, all the alarm history will be cleared.
5.79 Inverter Reset (P.997)
P.997 “Inverter reset”
● Once P.997 is read-out (after the read-out, the screen will display
) and rewritten-in, the
inverter is reset. After resetting the inverter, the values of the two relays, “electronic thermal relay”
and “IGBT module thermal relay”, will be set to zero.
● The usage method for the inverter reset function of DU06 is as follows:
Press
to switch to the parameter setting mode, and then rotate
until
is displayed.
After pressing
, 0 will be displayed. After that, rotate
to change the value to 1 and press
to write in that the inverter will be reset. After that, the thermal accumulation value of the
electronic thermal relay capacity and the electronic thermal relay of the inverter’s IGBT module
will ruturn to zero.