Introduction of Shihlin Inverter
Introduction of Inverter
18
3.5.6 Terminal wire arrangement
===== Note: ==============================================================
1. For the usage of the external thermal relay, please refer to P.80~P.84, P.86 in Chapter 5.
2. Make sure not to short circuit the PC and SD.
3. In the above figure, Dotted line metal, please refer to 3.5.7
4. The SO terminal can select to FM or 10X function, please refer to P.64, P.74.
5. For single-phase series inverters, there is no T/L3 terminal, and the corresponding wiring(dotted
line) doesn’t need to be connected.
=======================================================================
