6. Large capacity cassette (LCC) adjustment
(1) Off-center adjustment
Make an original as shown below, and make a normal copy with the
large capacity cassette. Move the tray lock plate in the arrow direction
to adjust so that the shift of the copy center from the original center is
within 1.5mm.
(Note) This adjustment must be performed without center shift on
the lens of the copier. (Allowable center shift: 1.5m)
1
Put the original on the original table, and make a normal copy with
the large capacity cassette.
2
Check the copy. Loosen two screws (a) of the tray lock plate, and
move and adjust the tray lock plate in the arrow direction.
3
After completion of tray cover line alignment by the off-center
adjustment and the off-center adjustment, loosen eight screws (b)
which are fixing the tray cover. Slide the tray cover to adjust so
that the clearance between the tray cover and the both side
covers is 4
±
1mm.
(Reference) When the off-center adjustment is shifted toward B, the
tray cover is slid in the direction of D.
Center line
Original center
(Original)
Within
1.5mm
Within
1.5mm
Copy paper center
(Copy
1
)
Move the tray lock plate in the direction B
by the shift
(Copy
2
)
Move the tray lock plate in the direction A
by the shift
Copy paper center
[External view reference]
Tray cabinet upper
Tray cover
Reference soze 4±1
Left side view
Right side view
Section b
Section d
Section a
Tray cover unit
Section a
Direction A
Direction B
Scale (Pitch:mm)
Tray lock plate
b
b
C
F
D
Frame
Tray cabinet (Upper)
Sliding direction
Tray cover
bracket
Scale pitch
1mm
Tray cabinet (Right)
Tray cover
8 – 24
