4
Remove the E-ring, and remove the take-up roller spring clutch.
@
When the spring inside the spring clutch is removed, be careful of
the attachment position of the spring to the sleeve for assembly.
5
Remove the manual feed arm B.
6
Remove the take-up roller from the manual feed arm.
7
Remove two linkage gears (C-ring and E-ring), and remove the
E-ring of the paper feed roller spring clutch.
8
Remove the take-up roller and the paper feed roller together with
the manual arm C.
9
Remove the take-up roller.
F
Remove the clutch boss, the spring clutch, and the clutch sleeve
of the paper feed roller spring clutch.
G
Remove the spring and three E-rings, and remove the bearing.
H
Remove the pin, the clutch boss of the paper feed spring clutch,
and the bearing.
I
Remove three E-rings, and remove the shaft and the paper feed
roller.
J
Remove one screw and separate pressure release levers A and B
from each other.
K
Remove one screw, and remove the frame which is connecting
the pressure release lever B and the separation (reverse) roller
pressing plate.
L
Remove the E-ring and the shaft, and remove the pressing plate
with the manual separation (reverse) roller.
@
Be careful of the position of the spring which is attached to the
pressing plate.
M
Remove the stopper.
N
Remove the E-ring, and remove the separation (reverse) roller
unit.
7 – 7