Key operator program list
Code
Program name
Function
Page No.
P10
Auditing Mode
Enables or disables the basic auditing mode for copier access.
6
P11
Copies by Account
Displays the total number of copies made against account numbers.
6
P13
Billing Clear Mode
Clears all audit accounts or selectively clears individual accounts.
6
P14
Account
Number
Control
Enters account numbers, clears account numbers, changes an
account number, or displays all assigned account numbers.
7
P16
Account Limit Setting
Sets the maximum number of copies which can be made against an
assigned account number.
9
P18
Account Number Security
Guards against trial and error entering of audit account numbers.
10
P19
Key Operator Code Number Change
Changes the Key Operator Code Number.
10
P20
Auto Exposure Adjust
Lightens or darkens copies in the automatic exposure mode.
11
P21
Auto Power Shut-off Timer
Activates and sets a time interval after which the copier automatically
turns off.
11
P22
Toner Save Mode
Reduces toner consumption.
11
P23
Auto Clear Setting
Sets a time interval after which the copier returns to the initial settings.
12
P24
Add or Change Extra Presets
Adds or changes reduction and enlargement preset copy ratios.
12
P25
Limit of Maximum Copies Selected
Sets the limit of maximum number of copies to be selected.
13
P26
Initial Margin Shift Setting
Sets the initial margin shift values.
13
P27
Erase Width Adjustment
Sets the amount of the erase area.
13
P28
Initial Status Setting
Sets the copier’s initial settings in the ready condition.
14
P29
Total Copy Count
Recalls the total copy counts of the copier, document feeder, duplex
section, and staple sorter.
14
P31
Preheat Mode setting
Set the time that elapses before the copier enters the preheat mode
after copying is completed.
15
P42
Right/Left Shift Direction Selection
Determines whether shift direction change is to be allowed.
15
P43
Erase Mode Selection
Sets the initial mode for erase function.
15
P44
Restrict Storage of Inserts in Job Program Memory Prevents insert pages from being stored in job memory.
16
P45
Message Time Setting
Sets the length of time that messages are displayed.
16
P46
Disable Operation
Prevents the copier from being started by people other than key
operator.
16
P47
Stream Feeding Mode
Enables the stream feeding mode for copying from the document
feeder.
16
P70
Disabling of Auto Paper Selection
Prevents automatic paper selection.
17
P71
Disabling of Auto Tray Switching
Prevents automatic switching between the paper trays.
17
P72
Bypass-Tray Prohibited in Duplex Copy
Prohibits the use of the bypass tray during duplex copying.
17
P73
Disabling of Job Program Changing
Prevents stored programs from being altered.
18
P74
Disabling of Document Feeder
Prevents the use of the document feeder when it malfunctions.
18
P75
Disabling of Duplex Copying
Temporarily prevents the duplex system from operating when it
malfunctions. Allows the use of the copier but not the duplex system.
18
P76
Disabling of Stapler
Prevents damage to the stapler while awaiting repair service. (The
staple sorter is optional.)
19
P77
Disabling of Covers and Inserts
Prevents the selection of COVERS/INSERTS mode.
19
P83
PC/Modem Access
Provides access to key operator programs through a PC/modem
without keyoperator code entry.
(Remote access to key operator programs can be performed only
when a computer or other equipment is connected to the copier directly
or through a telephone line.)
19
P90
Display the List of All P Codes
Sequentially displays all available programs.
20
10 – 2
