(2) SF-C52
Included parts
Upper LCC mounting brackets (2)
Lower LCC mounting bracket (1)
M4 x 8 securing screws (8)
Disconnect the plug to the main copier unit before
performing the following procedures.
1. Using the adjusters to stabilize the main copier unit
To stabilize the main copier unit, lower the two adjusters on the front
of the main unit of the copier until they reach the floor.
2. Removing the right center cover and the strip beneath
the lower right cover
Remove the two securing screws which hold the right center cover in
place, then remove the right center cover. Thread the two securing
screws back into the holes from which they were removed.
Next, remove the securing screw which holds the strip beneath the
lower right cover in place.
Then, remove the strip.
3. Mounting the upper and lower LCC mounting brackets
Mount the two upper LCC mounting brackets to the main copier unit
using two M4 x 8 securing screws for each bracket.
Adjuster
Adjuster
Right center cover
Securing screws
Lower right cover
Strip
Securing screw
Strip
Securing screws
Securing screws
Upper LCC mounting brackets
6 – 16