Main
code
Sub
code
Item
Contents
Adjustment value
Ref. page
Default
Adjustment
scope
After completion of warming up, copying is allowed.
Note 1: ( ) shows the input range of adjustment value.
Note 2: When the adjustment value is set to "0," the adjust-
ment is similar to that of the default value.
3
Resist amount
adjustment value
input
When the sub code is entered, the LCD shows the following
display and the currently set value of "51A" (RRC front warp
amount in manual paper feed) is displayed on the copy quan-
tity display. With the RPL on, enter the set value with the
10-key pad and press the START key to store it.
—
—
—
SIMULATION NO. 51-3
RRC PAPER BUCKLE ADJUSTMENT.
> 51A (1~99)
:
46
[MFT]
51B (1~99)
:
46
[TRAY1]
51C (1~99)
:
46
[TRAY2]
51D (1~99)
:
46
[TRAY3]
51E (1~99)
:
46
[TRAY4]
51F (1~99)
:
46
[LCC]
51F (1~99)
:
46
[ADU]
Press the scroll key (
→
) to scroll the message display on the
LCD and the copy quantity display as follows:
51B
→
51C
→
51D
→
51E
→
51F
→
51G
→
51A
→
The set value can be stored or changed in the same manner
as in "51A." The RRC front warp amount van be adjusted in
the range of 1
∼
99 for each tray. The greater the adjustment
value is, the greater the warp amount is, and vice versa. (1
count = 0.36mm; Default value, manual feed = 75, tray 1
∼
4 =
70, LCC = 75, ADU = 70)
WARP
AMOUNT OFF TIMING
H
G
(1~60)
: Manual feed tray
SCROLL kEY
ON
: Tray 1
SCROLL kEY
ON
: Tray 2
SCROLL kEY
ON
: Tray 3
SCROLL kEY
ON
: Tray 4
SCROLL kEY
ON
: LCC
SCROLL kEY
ON
: Intermediate tray
INTERRUPTION KEY ON
COPY QUANTITY DISPLAY
LCD DISPLAY
* * *
* * *
* * *
* * *
* * *
* * *
* * *
H
G
(1~60)
INTERRUPTION KEY ON
H
G
(1~60)
INTERRUPTION KEY ON
H
G
(1~60)
INTERRUPTION KEY ON
H
G
(1~60)
INTERRUPTION KEY ON
H
G
(1~60)
INTERRUPTION KEY ON
H
G
(1~60)
INTERRUPTION KEY ON
ADU
(1~99)
LCC
(1~99)
CAS4 (1~99)
CAS3 (1~99)
CAS2 (1~99)
CAS1 (1~99)
MFT
(1~99)
9 – 37
