manualshive.com logo in svg

Sharp MX-2010U, Operation Manual

The Sharp MX-2010U is a versatile multi-function printer that combines high-quality printing, scanning, and copying capabilities. For easy operation and smooth functionality, it comes with a comprehensive Operation Manual available for free download from our website. Discover the full potential of this product with our user-friendly manual.

Share
Download
background image

8-39

TROUBLESHOOTING

Contents

PROBLEMS RELATED TO MACHINE OPERATION

Problem

Point to check

Solution

Specified machine 
functions cannot be 
used.

Have functions been disabled by the 
administrator?

Check with your administrator.

Some functions may have been disabled in the system 
settings (administrator). Check with your administrator.
When user authentication is enabled, the functions that 
you can use and page counts may be restricted in your 
user settings.

The operation panel 
cannot be used.

Is the main power indicator lit?

If the main power indicator is not lit, turn on the 
power.

Make sure that the power plug is firmly inserted in the 
power outlet, switch the main power switch to the "on" 
position, and press the [POWER] key (

) to turn on 

the power.

Did you just power on the machine?

Wait until a message appears indicating that the 
machine is ready.

After the [POWER] key (

) is turned on, the machine 

requires some time to complete warmup operation.
During this time functions can be selected, however, a 
job cannot be run.

Is the [POWER SAVE] key (

) 

blinking?

Press the [POWER SAVE] key (

) to turn off Auto 

Power Shut off mode.

☞

1. BEFORE USING THE MACHINE "

[POWER 

SAVE] KEY

" (page 1-16)

Is a cover open or a device separated 
from the machine?

Read the message and take appropriate action.

A warning message will appear when a cover is open or 
a device is separated from the machine.

Did login fail three times in a row?

Log in using the correct user information.

When "A Warning when Login Fails" is enabled in the 
system settings (administrator) and login fails 3 times in 
a row, a warning will be displayed and operation will 
lock for 5 minutes. After operation unlocks, log in using 
the correct user information. (If you do not know your 
user information, contact your administrator.)

Does a message appear indicating that 
Auto Login failed?

Contact your administrator.

Auto Login failed due to a problem on the network.
If you are the administrator, touch the [Admin Password] 
key, log in as an administrator, and temporarily change 
the auto login settings in the system settings 
(administrator). (Restore the changed settings to their 
original state after the network problem has been 
solved.)

The operation panel 
cannot be used.

Does the message "Call for service. 
Code:xx-xx*." appear in the touch 
panel?
*Letters and numbers appear in xx-xx.

Switch the power off and then restart the machine.

Make sure that the LINE indicator is not lit and that the 
DATA indicator is not blinking or lit and then switch off 
the [POWER] key (

) and the main power switch. 

Wait at least 10 seconds and then switch the main 
power switch and the [POWER] key (

) back on in 

that order.
If the message still appears after switching the 
[POWER] key (

) and main power switch off and on 

several times, it is likely that a failure has occurred that 
requires service. In this event, stop using the machine, 
unplug the power plug, and contact your dealer or 
nearest authorised service representative. (When 
contacting your dealer or nearest authorised service 
representative, inform them of the displayed error code.)

Summary of Contents for MX-2010U

































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for MX-2010U

Panasonic KX-PS8000 Reference Manual preview
KX-PS8000
Brand: Panasonic Pages: 155
Panasonic KX-MB2061 Operating Instructions Manual preview
KX-MB2061
Brand: Panasonic Pages: 160
NCR 7150 Quick Start Manual preview
7150
Brand: NCR Pages: 2
Oki C6150dn Material Safety Data Sheet preview
C6150dn
Brand: Oki Pages: 48
Oki B2500 MFP Guía Del Usuario preview
B2500 MFP
Brand: Oki Pages: 42
Oki B2500 MFP Setup Manual preview
B2500 MFP
Brand: Oki Pages: 2
Oki C810n Accessory Installation Manual preview
C810n
Brand: Oki Pages: 8
Oki B 4600n Installation And Training Module preview
B 4600n
Brand: Oki Pages: 13
Oce CS9065 Features & Specifications preview
CS9065
Brand: Oce Pages: 2
Oki MB460MFP Guía Del Usuario preview
MB460MFP
Brand: Oki Pages: 193
Canon RP10 User Manual preview
RP10
Brand: Canon Pages: 37
Xerox Phaser 6300/DN Repacking Manual preview
Phaser 6300/DN
Brand: Xerox Pages: 3
Xerox DocuColor 252 Specifications preview
DocuColor 252
Brand: Xerox Pages: 8
Xerox Versant 3100 Press Security Manual preview
Versant 3100 Press
Brand: Xerox Pages: 45
imagistics fx2100 Quick Start Manual preview
fx2100
Brand: imagistics Pages: 57
Oki OKIFAX 5050 Handbook preview
OKIFAX 5050
Brand: Oki Pages: 98
Kyocera Mita FS-1050 Operation Manual preview
FS-1050
Brand: Kyocera Mita Pages: 209
Ricoh Aficio 2238C Operating Instructions Manual preview
Aficio 2238C
Brand: Ricoh Pages: 126

Brands by name

Popular brands

Load more brands