Sharp MX-2010U, Operation Manual, Page: 703 / 832

7-35
SYSTEM SETTINGS
Contents
*1 When the hard disk drive is installed.
*2 When the automatic document feeder is installed.
*3 When a paper drawer is installed.
*4 When a finisher is installed.
*5 When a punch module is installed.
*6 When a colour-related problem has occurred.
Copy Function Settings
X
Disabling of Offset Disabled 7-69
X
Disabling of Stapler *
4
Disabled 7-69
X
Disabling of Punch *
5
Disabled 7-69
X
Disabling of Colour Mode *
6
Disabled 7-69
●
Fusing Control Settings 60 - 89
g
/m
2
(16 - 23 lbs.) 7-69
Item Factory default setting Page
■
Copy Function Settings
7-70
●
Initial Status Settings
7-70
X
Colour Mode Full Colour
X
Paper Tray Varies depending on the machine
configuration
X
Exposure Type Auto
X
Copy Ratio 100%
X
2-Sided Copy 1-Side to 1-Side
X
Output –
●
Other Settings 7-71
X
Copy Exposure Adjustment
7-71
‹
Colour 5
‹
Black & White 5
X
Rotation Copy Setting Enabled 7-71
X
Add or Change Extra Preset Ratios – 7-71
X
Setting a Maximum Number of Copies 999 7-71
X
Initial Margin Shift Setting
7-71
‹
Side 1 10 mm (1/2")
‹
Side 2 10 mm (1/2")
X
Erase Width Adjustment
7-71
‹
Edge Clearance Width 10 mm (1/2")
‹
Centre Clearance Width 10 mm (1/2")
X
Card Shot Settings
7-71
‹
Original Size X: 86 mm (3-3/8"), Y: 54 mm (2-1/8")
‹
Fit to Page Disabled
Item Factory default setting Page