Sharp MX-2010U Page 646 Operation Manual Download

Page: 646 / 832

6-30

DOCUMENT FILING

Contents

JOB SETTINGS SCREEN

When a file key is touched, the following screen appears. Touch the key of the operation that you wish to perform and
select settings.

(1)

File display

This shows information on the currently selected file (job
icon, file name, user name, store size, and colour mode).

(2)

[Cancel] key

Touch this key to cancel the operation and return to the
file selection screen.

(3)

[Print] key

Touch this key to print the selected file.

☞

PRINTING A STORED FILE

(page 6-31)

(4)

[Move] key

Use this procedure to change the location of a file (move
a file to a different folder).

☞

MOVING A STORED FILE

(page 6-41)

(5)

[Send] key

This is used to send a stored file by fax, Internet fax, scan
send, or other method.

☞

SENDING A STORED FILE

(page 6-37)

(6)

[Delete] key

Touch this key to delete a file that is no longer needed.

☞

DELETING A STORED FILE

(page 6-43)

(7)

[Property Change] key

Use this key to change the property ("Sharing", "Protect",
or "Confidential") of a stored file.

☞

PROPERTIES OF STORED FILES

(page 6-39)

(8)

[Image Check] key

An image of the stored file appears.

☞

CHECKING AN IMAGE OF A STORED FILE

(page

6-44)

(9)

[Detail] key

Touch this key to show detailed information on the
selected file.
When this key is touched, the following screen appears.

If you wish to change the file name, touch the [File Name]
key in this screen.
A text entry screen will appear. Enter the desired file
name.
The

key appears when a special mode is selected.

Touch the

key to display the special mode selection

confirmation screen.

Job Settings

Cancel

file-01

Name 1

F. Colour

Send

Image Check

Property

Change

Move

Delete

Detail

Select the job.

Main Folder

File Name

file-01

Name 1

04/04/2010

file-02

Name 2

04/04/2010

file-03.tiff

Name 3

04/04/2010

file-04

Name 4

04/04/2010

file-05.tiff

Name 5

04/04/2010

User Name

Date

All Files

Switch Display

Back

Multi-File Print

File Retrieve

Scan to HDD

HDD Status

Ex Data Access

(2)

(1)

(4)

(6)

(5)

(3)

(7)

(9)

(8)

Job Settings / Detail

File Name

file-01

Name 1

Folder:Main Folder

Size:A4

Date:04/04/2010 11:20

Data Size:40B

Document
Style:

Output:

Resolution:600X600dpi

Colour / B/W:Full Colour

Pages:10

Special
Modes:

File Type:

Summary of Contents for MX-2010U

































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2010U

Reviews:

Related manuals for MX-2010U

Brands by name

Popular brands

Sharp MX-2010U, Operation Manual

Search results

Summary of Contents for MX-2010U

Reviews:

Related manuals for MX-2010U

Brands by name

Popular brands