manualshive.com logo in svg

Sharp AR-BC260, Service Manual

Share
Download
Sharp AR-BC260 Service Manual Download Page 51

AR-BC260  DESCRIPTIONS OF EACH SECTION  7 - 14

l. Belt cleaning brush

1) Remove the transfer unit from the machine.

2) Remove the connector and the screw, and remove the belt

drive unit.

3) Remove the transfer belt.

4) Remove the Belt cleaning brush.

m. Transfer discharge sheets.

1) Remove the transfer unit from the machine.

2) Remove the connector and the screw, and remove the belt

drive unit.

3) Remove the transfer belt.

4) Remove the terminals.

5) Remove the transfer discharge sheets.

n. Transfer lift-up unit

1) Remove the screw, and remove the left cabinet of the

machine.

2) Remove the connector.

3) Adjust the rail positions so that section A does not make con-

tact with the acuride section when the transfer lift-up unit is
lifted up.

4) Lift the transfer lift-up unit in the arrow direction B with section

A as the fulcrum, and remove it.

A

A

A

A

B

Summary of Contents for AR-BC260





















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands