AR-BC260 SIMULATION 9 - 76
6. Set the color patch image (adjustment pattern) printed in
procedure 5) on the document table. (Set the image so that the
higher-density area comes on the paper exit side.)
7. Press [FACTORY] key on the operation panel, and press
[EXECUTE] key.
The printer color balance adjustment (step 2) is automatically
executed, and the color balance check patch image is printed
out.
8. Press [OK] key on the operation panel. Initial setting of half-
tone image connection is executed according to the
adjustment data.
When this function is executed:
When installing (including the AR-PK4), when replacing
consumable parts (Drum cartridge, TN cartridge, transfer belt),
when changing to "1" with SIM 26-54, when the screen is switched
with SIM 67-29, or when there is a great change in color.
∗
Execute after the automatic adjustment (SIM 46-24) of copy.
3. Enter a set value with the 10-key, and press [OK] key. (When
[v]/[^] key is pressed, the set value is increased or decreased
in the increment of 1.
[OK] key is highlighted and the set value is saved to the
backup area and the RAM. Sending is made to the printer
controller.
After completion of sending, [OK] key is returned to the normal
display.
4. Press the [EXECUTE] key.
[EXECUTE] key is highlighted, and self-print is executed.
After completion of the operation, [EXECUTE] key is returned
to the normal display.
Common to KCMY
3. Set the color patch image (adjustment pattern) printed in SIM
67-25 on the document table, and press [EXECUTE] key.
[EXECUTE] key is highlighted and sampling is executed.
4. After completion of the operation, [EXECUTE] key is returned
to the normal display, and the sampling result is displayed.
When [REPEAT] key is pressed, the process returns to
procedure 3).
5. Press the [OK] key.
The displayed target value is saved to the backup area as the
target value.
∗
For BASE, only the sampling result display menu is displayed.
67
-25
Purpose
Adjustment
Function
(Purpose)
Printer engine color balance manual correction: PG
print (Used to perform a fine adjustment of color
from the adjustment of SIM 67-24. )
Operation/
Procedure
1. Select a color to be set.
2. Select an item to be set.
Item
Set range
Default
A
POINT1
1 – 99
50
B
POINT2
1 – 99
50
C
POINT3
1 – 99
50
D
POINT4
1 – 99
50
E
POINT5
1 – 99
50
F
POINT6
1 – 99
50
G
POINT7
1 – 99
50
H
POINT8
1 – 99
50
I
POINT9
1 – 99
50
J
POINT10
1 – 99
50
K
POINT11
1 – 99
50
L
POINT12
1 – 99
50
M
POINT13
1 – 99
50
N
POINT14
1 – 99
50
O
POINT15
1 – 99
50
67
-26
Purpose
Adjustment
Function
(Purpose)
Used to select the target value of the referenced
scanner in the printer engine automatic density
adjustment. (The target value set with SIM 67-24
and the gray balance can be adjusted.)
Operation/
Procedure
Select a target value (set value). The selected
target value (set value) is highlighted.
Content of item
Set value
Default
Target value table setting
DEF1, DEF2, DEF3
DEF1
67
-27
Purpose
Adjustment
Function
(Purpose)
Used to display and register the scanner target
value (for servicing) of the printer engine automatic
density adjustment. (Conforms to the service button
of SIM 67-24. (The serviceman can scan the target
value.))
Operation/
Procedure
1. Select a color for sampling.
2. Press [SETUP] key.
Display data
Display content
B
Target value of point B
C
Target value of point C
D
Target value of point D
E
Target value of point E
F
Target value of point F
G
Target value of point G
H
Target value of point H
I
Target value of point I
J
Target value of point J
K
Target value of point K
L
Target value of point L
M
Target value of point M
N
Target value of point N
O
Target value of point O
BASE
Base sampling value
